Flatbed Tarping Safety

flatbed-tarpingPrint a Sign-In Sheet | Spanish Version

Climbing the load:

  • If possible, have a forklift place the tarp on the load
  • Use a ladder to access the load

Ladder safety:

  • Inspect the side rails and rungs
  • Make sure the ladder has solid footing
  • Extend the ladder 3 feet above the load
  • Keep 3 points of contact

Carefully unfold the tarp:

  • Position the tarp on the back of the load
  • Never walk backward
  • Watch for holes and uneven sections in the load
  • Work from your hands and knees near load edges
  • Carefully unfold the tarp and drop over the sides
  • Fasten rear folds from the top of the load

Fastening the tarp:

  • Wear safety glasses
  • Use bungee straps to help hold the tarp
  • Pull bungee straps away from your body/face
  • Keep fingers away from pinch points
  • Turn strap hooks away from the tarp

Removing the tarp:

  • Grab one corner and raise it quickly to get air under the tarp
  • Use a steady, balanced tug and pull
  • Get the tarp neat, flat and square to make it easier to fold
  • Work smart- drag the tarp to the storage area.

KEMI does not assume liability for the content of information contained herein. Safety and health remain your responsibility. This information is to be used for informational purposes only and not intended to be exhaustive or a substitute for proper training, supervision or manufacturers’ instructions/recommendations. KEMI, by publication of this information, does not assume liability for damage or injury arising from reliance upon it. Compliance with this information is not a guarantee or warranty that you will be in conformity with any laws or regulations nor does it ensure the absolute safety of any person, place or object, including, but not limited to, you, your occupation, employees, customers or place of business.

 

Share